“Pine Cone” Carbide Nail Drill Bit for Left-Handed Users (L), Blue Band

“Pine Cone” Carbide Nail Drill Bit for Left-Handed Users (L), Blue Bandhas a cone shape that provides convenience and allows easy work in hard-to-reach areas. Thanks to its cross-shaped notch, it removes material evenly, without vibration or discomfort for the client. Each bit is checked for collet centering, which guarantees smooth movement and durability in use.
The bit is made of high-quality tungsten carbide — a material distinguished by particular strength, wear resistance and a long service life. The nail plate does not heat up while the material is being removed.
Features:
Shape: cone;
Purpose: removal of artificial coating, nail correction, arch filing in Reverse;
Suitable for removing soft, hard and hybrid coatings;
Smooth movement and even removal without overheating;
Recommended speed: 25,000–35,000 RPM, direction — Reverse;
Notch color: blue;
Abrasiveness: medium, cross-shaped notch;
Head length: 15 mm;
Shank length: 33.8 mm;
Tip diameter: 2.3 mm;
Working part diameter (middle): 4.1 mm.
Advantages:
Wear resistance 2–3 times higher than standard bits, thanks to the tungsten carbide material and high-quality sharpening;
Does not darken after sterilization;
Operation without vibration, easy glide;
Does not clog with material, removes the coating faster;
Does not overheat the nail and does not cause a burning sensation;
Removes without scratches;
Does not attract (magnetize) dust;
Has a sharp working tip for precise filing.
Care of carbide bits:
Mechanical cleaning after each use with a special brush.
Soak in a special solution for cleaning burrs and bits, or clean in an ultrasonic cleaner.
Follow the disinfectant solution concentration according to the manufacturer's guidelines (excess concentration damages the material).
Sterilize in a dry-heat sterilizer only when the bit is completely dry and at a temperature not exceeding 180°C.
Shelf life: unlimited.
(Product photos on the website may differ from the actual product.)